齿科材料-树脂材料与印模材料原辅料大全-百灵威

齿科树脂材料以其良好的强度、韧性、自然色泽和优秀的粘接性，广泛应用于修复龋齿、牙齿缺损，改善牙齿外观等多种牙科治疗和美容修复中。通常由单体、填料、引发剂、添加剂等组成，单体是其基础成分。

齿科树脂材料具有良好的美观性，能模拟牙齿的自然色泽和透明度。操作便捷，固化速度快，且具有较好的粘接性能，能与牙齿结构牢固结合。相比金属材料，其对牙髓的刺激更小。

百灵威可大包装供应树脂材料合成用各种单体、引发剂等，种类齐全，价格优惠！

品名	CAS	货号
Methyl methacrylate, 99%, reagent grade 甲基丙烯酸甲酯	80-62-6	123196 危化品
Methacrylic acid, 99%, stabilized with 250 ppm MEHQ 甲基丙烯酸	79-41-4	280873 危化品
Bis(2-methacryloxyethyl) phosphate 磷酸氢二(甲基丙烯酰氧乙基)酯	32435-46-4	507243
Isodecyl methacrylate, 95% 甲基丙烯酸异癸酯	29964-84-9	263817
Poly(methyl methacrylate) 聚甲基丙烯酸甲酯	9011-14-7	933840
Ethylene glycol dimethacrylate, 98%, stabilized with 100 ppm MEHQ 二甲基丙烯酸乙二醇酯	97-90-5	159800
N,N-Dimethyl-p-toluidine, 99% N,N-二甲基对甲苯胺	99-97-8	224119
Camphorquinone, 98%, Bright yellow solid 樟脑醌	10373-78-1	294607
Benzoyl peroxide, 98%, reagent grade, wetted with ca. 25% H2O 过氧化苯甲酰	94-36-0	968988 危化品
Titan Yellow, indicator 钛黄	1829-00-1	259982
Titanium(III) oxide, 99.9%, 100 mesh 氧化钛(III)	1344-54-3	500198
Titania B phase nanofibers, 98%, width: 200 - 200 nm, length: 5 - 20 μm, SSA: 30 - 50 m2/g 氧化钛-B混相纳米纤维	1317-80-2	948539
Copper nanowires, 98%, 10 mg/mL dispersion in water, diam.: 100 - 200 nm, length: 0.8 - 6 μm 铜纳米线	7440-50-8	940441
Silica gel, 98%, for chromatography, 0.040 - 0.063 mm (230 - 400 mesh), 60 A 硅胶	7631-86-9	932233
Methanol, 99.9%, HPLC/ACS 甲醇	67-56-1	116481 危化品

品名	CAS	货号
Poly(methyl methacrylate) 聚甲基丙烯酸甲酯	9011-14-7	933840
Silicon dioxide, AR 二氧化硅	14808-60-7	982085
Benzoyl peroxide, 97.5%, wetted with ca. 25-30% H2O 过氧化苯甲酰	94-36-0	934368^新危化品
Methyl methacrylate, 99%, reagent grade 甲基丙烯酸甲酯	80-62-6	123196 危化品
Hydroquinone, 99.5%, for synthesis 对苯二酚	123-31-9	338988 危化品
Ethylene glycol dimethacrylate, 98%, for synthesis, stabilized with 100 ppm MEHQ 二甲基丙烯酸乙二醇酯	97-90-5	926456
2,2'-(p-Tolylimino)diethanol, 98%, for synthesis 2,2'-(对甲苯氨基)二乙醇	3077-12-1	908486
Copper(II) acetylacetonate, 99% 乙酰丙酮铜(II)	13395-16-9	537056
2,6-Di-tert-butyl-4-methylphenol, 98.5% 2,6-二叔丁基-4-甲基苯酚	128-37-0	432646
2-Hydroxy-4-methoxybenzophenone, 98% 2-羟基-4-甲氧基二苯甲酮	131-57-7	328801

印模材料则用于牙齿治疗过程中取模，可以精确地复制患者的牙齿和口腔结构，以制作出合适的修复体。

品名	CAS	货号
Vinyl terminated Polydimethylsiloxane cSt 200, average M.W. 9400 乙烯基封端的聚二甲基硅氧烷 cSt 200	68083-19-2	486599
Poly(methylhydrosiloxane), 15 - 40 cps 聚(甲基氢硅氧烷)	63148-57-2	242854
Chloroplatinic acid hexahydrate, 99.9%, trace metals basis, 38 - 40% Pt 氯铂酸六水合物	18497-13-7	111781 危化品
Titania B phase nanofibers, 98%, width: 200 - 200 nm, length: 5 - 20 μm, SSA: 30 - 50 m2/g 氧化钛-B混相纳米纤维	1317-80-2	948539
Silica gel, 98%, for chromatography, 0.040 - 0.063 mm (230 - 400 mesh), 60 A 硅胶	7631-86-9	932233
Sodium alginate, very low viscosity,Viscosity:≤10 Cp (1% in H2O, 25 ℃) 海藻酸钠	9005-38-3	937673
Diatomaceous earth, permeability: 2.0 - 3.5 darcy 硅藻土	61790-53-2	997754
Potassium hexafluorotitanate, 98% 氟钛酸钾	16919-27-0	540762
Sodium pyrophosphate, 99%, for synthesis 焦磷酸钠	7722-88-5	206204
Sodium phosphate, 97%, anhydrous 磷酸钠	7601-54-9	997519
Mineral oil, Industrial grade, 25cSt, 40℃ 矿物油	8020-83-5	451486^新
Calcium sulfate dihydrate, 99%, for synthesis 硫酸钙二水合物	10101-41-4	112806
Tartrazine, indicator 柠檬黄	1934-21-0	253583

点击货号查看产品详情

齿科材料-树脂材料与印模材料原辅料大全